Manatarms25

iTrader: (223)

For Sale
Factory Team RC8 BE edition
I purchased this kit new from Tower as well as all the electronics at the same time. Everything has been used for 2 indoor races only. Never used outdoors or bashed.
1/8 is just not my thing, I prefer 1/10 RC’s
I will include all boxes, manuals, decals and receipts from Tower.
Package deal includes everything listed below, I have purchased a parts lot from a local racer that was leaving the hobby that is also included. You will have TON’s of spare parts!
At this time I am NOT selling the electronics separately unless someone buys the roller, tires and parts. Please do not ask.

FT RC8 BE
Tekin Rx8 (2 races old)
Tekin T8 1900 kv (2 races old)
Savox 1256 (2 races old)
Gens Ace hard case 4s 5000 mah 40c (2 races old)
** Stored in storage mode and balances 100%**
RC8 has the new 10x1.1 Taper Pistons installed and has Kyosho light blue springs all around.
Kit was built using 5k,5k,5k oil and 30wt front and 25wt rear in the shocks.
**** Shown AMB Personal is NOT included ****

Tires/ Rims included
4x Pather Rattlers (clay) mounted on black DE wheels (1 race old)
4x Pro-line Hole Shots mounted on white AE Rims (1 race old)
4x Jconcepts blue Goosebumps (new unmounted) with AKA black foams
4x Jconcepts yellow Crossbows (new unmounted) with AKA red foams
4x Jconcepts Relux Rims Black (new unmounted)

Parts included
NIP = New In Package
Loose = Opened or used

NIP 2x 89025 RC8 Front Arm Set
NIP 1x 89027 RC8 Rear Arm Set
Loose 1x Left Front Lower Arm + Upper Arm
NIP 1x 89258 RC8 Chassis Braces
Loose 1x RC8 Chassis Braces
NIP 1x 89030 RC8 Caster Blocks
NIP 1x 89033 RC8 Hub Carriers
NIP 1x 89010 RC8 Top Plates
Loose 3x RC8 Top Plates
NIP 1x RC8-25 Front/Rear Sway Bar Set
Loose 1x Silver Rear Springs
Loose 1x Brown Front Springs
Loose 1x Black Front Springs
Loose 2x CVA Drive shafts
Loose 2x Complete CVD shafts
Loose 1x Carbon Fiber Ackerman Bar
NIP 2x 89076 RC8 Camber Rod Ends
NIP 1x RC8 Steering Rod Ends
Loose RC8 Steering Rod Ends
NIP 1x 89230 Silver Cone Washer Set
NIP 1x 89018 RC8 Gearbox Gasket Set
NIP 2x 89032 Caster Angle Bushings
NIP 1x 89031 RC8 Caster Hub Spacers
NIP 1x 89040 RC8 Inner Hinge Pins
NIP 1x 89096 RC8 Wheel Hex Pins
NIP 1x 89041 RC8 Outer Hinge Pins
NIP 1x 89056 RC8 Internal Snap Rings
NIP 1x Diff O-Ring Set
Loose 1x Diff Gear Set
Loose Front Shock Stay
Wheel Wrench
Loose 1x Set Truggy Hubs and wheel nuts (for added width)
NIP 1x 89062 RC8 Shock Spring Cups
NIP 1x 89064 RC8 Shock Rebuild Kit
NIP 1x 89065 RC8 Shock Rod Ends
NIP 1x 89054 Gold Shock Shaft 38mm
NIP 1x 89053 Gold Shock Shaft 28mm (1 Loose)
NIP 1x 89083 RC8 Shock Bushings
NIP 1x Undrilled shock piston set
Loose 5 hole shock piston set





Trades considered are
Losi 22 Buggy set-ups, SC10 4x4 Set-ups-- Trades equal in value or partial ok with $$
Trades only with RC Tech Members with established seller/trading feedback ratings 15+ or the member will be shipping 1st due to the value of the package.
I can also provide a video of everything in working order but it is sold as is because of the nature of the hobby.

Selling Price is $ TRADED to Frank

Bortzilla

iTrader: (26)

X

guppy

iTrader: (55)

Pm sent

lpdconcepts

iTrader: (42)

You have a PM

rcbeast

iTrader: (31)

pm sent!!! very interested!!!!!!!

2slantedeyes

iTrader: (13)

pm sent