Seattle RC Racers/Hangar 30
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
If any one is looking for a good working updated LRP ESC come see me tonight. Have an updated SXX TC V2 (latest board) i'll let go for $100.00. It works perfect but has a little blue missing here and there...
Kody
Kody
Tech Regular
iTrader: (2)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I need to thin out some gear and would rather see it go local so im posting it here:
Team Associated TC6.1 roller: Converted TC6, has rear ball diff and front slipper, TC6 caster blocks, RSD shock bladders and 1,1,1.5 pistons, some spare springs, spare 6.1 sway bars, and a few spare parts. A few bulkheads kinda stripped and chassis scratches from pavement racing. Sweep 32 carpet tires with one night of racing on them.
$175, or $225 if I leave the XP DS1015 servo installed.
Spektrum DX3C Transmitter, with 2 receivers, spare grips, manual, box, $100
Hyperion EOS0610i Duo Charger, bought it used from Brian Bodine, has box, manuals, adapters, and was told it was sent out for a firmware update. $50
RSD AE TC6 2.5mm Carbon Rear Bumper $10
RSD AE TC6 Belt Tensioner/ Battery Spacer $10
RSD TC6 30mm Fan Aluminum Mount I have two of these, $7 each
Fantom Killer Voltz 2s lipo pack, 6500mah, 65C, $40
ProTek 2s lipo pack, 5000mah 35C, $20
See Matt Adkison at the gym tonight
Team Associated TC6.1 roller: Converted TC6, has rear ball diff and front slipper, TC6 caster blocks, RSD shock bladders and 1,1,1.5 pistons, some spare springs, spare 6.1 sway bars, and a few spare parts. A few bulkheads kinda stripped and chassis scratches from pavement racing. Sweep 32 carpet tires with one night of racing on them.
$175, or $225 if I leave the XP DS1015 servo installed.
Spektrum DX3C Transmitter, with 2 receivers, spare grips, manual, box, $100
Hyperion EOS0610i Duo Charger, bought it used from Brian Bodine, has box, manuals, adapters, and was told it was sent out for a firmware update. $50
RSD AE TC6 2.5mm Carbon Rear Bumper $10
RSD AE TC6 Belt Tensioner/ Battery Spacer $10
RSD TC6 30mm Fan Aluminum Mount I have two of these, $7 each
Fantom Killer Voltz 2s lipo pack, 6500mah, 65C, $40
ProTek 2s lipo pack, 5000mah 35C, $20
See Matt Adkison at the gym tonight
Last edited by chevtech23; 01-12-2013 at 01:18 PM.
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
All videos have been uploaded from Victoria.
https://www.youtube.com/joshuasouthoaks
Heat information is in the video's description.
https://www.youtube.com/joshuasouthoaks
Heat information is in the video's description.
Tech Initiate
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Was a great year for the 'hawks, next year here we come. Brian Bodine, did you take your fuzzy slippers off too soon?
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Well, we kicked off 2013 in the Gym with a big night of hard racing. We were 84 entries strong, with 14 heats, $1 slices of pizza in the lobby, and a stellar setup/teardown operation. The club is firing on all cylinders and barrelling at top speed. It's fun to be part of, for sure.
We saw three new track records set: Stock 1/12th to Bodine, Mod Touring to Knudtson, and Scale Spec to Kuney. The Mains featured some solid performances. Brett went tone to tone in Stock TC, showing his usual form. Keith Yu gave Kody a tough run in Mod. The Panda won in the end, but it's great to see Keith present and correct and taking the fight to Kody and keeping him honest. Panos fought through a difficult two rounds of qualifying and earned a bump spot to the A. Good on him for bearing down and staying in the hunt. Sean and I had a fantastic nose to tail for the majority of the Mod 1/12th main. He came out ahead...this time. There were many other fine drives, and perhaps some others can tell those tales.
We're back to back this weekend and next, so it's only six short days and we're back in the Gym on the 19th. Wrench on those cars and be ready for the next round! We'll have pizza again, most likely, as everyone seemed to really appreciate it.
Results attached.
We saw three new track records set: Stock 1/12th to Bodine, Mod Touring to Knudtson, and Scale Spec to Kuney. The Mains featured some solid performances. Brett went tone to tone in Stock TC, showing his usual form. Keith Yu gave Kody a tough run in Mod. The Panda won in the end, but it's great to see Keith present and correct and taking the fight to Kody and keeping him honest. Panos fought through a difficult two rounds of qualifying and earned a bump spot to the A. Good on him for bearing down and staying in the hunt. Sean and I had a fantastic nose to tail for the majority of the Mod 1/12th main. He came out ahead...this time. There were many other fine drives, and perhaps some others can tell those tales.
We're back to back this weekend and next, so it's only six short days and we're back in the Gym on the 19th. Wrench on those cars and be ready for the next round! We'll have pizza again, most likely, as everyone seemed to really appreciate it.
Results attached.
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Check back here in this post, I'll be adding more links to video's as I put them up....
Here are the video's from January 12th 2013 Seattle RC Racers :
Stock TC A main
http://www.youtube.com/watch?v=Blr8EQf0GIM
Stock TC B main
http://www.youtube.com/watch?v=Q02eFL89cqg
Mod TC
http://www.youtube.com/watch?v=N3JF0w19kvQ
Mod 12th
http://www.youtube.com/watch?v=EeruxCKfvog
Scale Spec A main
http://www.youtube.com/watch?v=r5i8CnWK1EY
Scale Spec B main
http://www.youtube.com/watch?v=zoAxuM_SuNA
Stock 1/12th
http://www.youtube.com/watch?v=pVfu0bJecfo
and..... F1
http://www.youtube.com/watch?v=IGtz8_3dh6c
Note, I will try to post many of the mains, so no need to post requests one by one.
Best to check my youtube channel named " outlate247 " or just subscribe to my channel.
Jake D.
Here are the video's from January 12th 2013 Seattle RC Racers :
Stock TC A main
http://www.youtube.com/watch?v=Blr8EQf0GIM
Stock TC B main
http://www.youtube.com/watch?v=Q02eFL89cqg
Mod TC
http://www.youtube.com/watch?v=N3JF0w19kvQ
Mod 12th
http://www.youtube.com/watch?v=EeruxCKfvog
Scale Spec A main
http://www.youtube.com/watch?v=r5i8CnWK1EY
Scale Spec B main
http://www.youtube.com/watch?v=zoAxuM_SuNA
Stock 1/12th
http://www.youtube.com/watch?v=pVfu0bJecfo
and..... F1
http://www.youtube.com/watch?v=IGtz8_3dh6c
Note, I will try to post many of the mains, so no need to post requests one by one.
Best to check my youtube channel named " outlate247 " or just subscribe to my channel.
Jake D.
Last edited by Magnet Top; 01-14-2013 at 11:28 PM. Reason: .
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Actually they were fuzzy Hawk slippers. That was a heart breaker of a game, too bad they missed the first half and the start of the 2nd. They should have a bright future. At least its not the same old, same old.
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Just so you guys know if anyone is interested I'm selling my 2 raceday old speedpassion reventon pro with programming card for $115 to anyone at the hanger but if you want it shipped its $120.
Also I have a lrp x12 4.5t with 2 factory works rotors and a stock rotor as well as ceramic bearings and lightweight can. $70
Also I have a lrp x12 4.5t with 2 factory works rotors and a stock rotor as well as ceramic bearings and lightweight can. $70
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Also for everyone running the spec r r1 or s1 cars I posted my setup I ran in the main in the spec r thread . I would recommend using it as it is a good one. Very easy to drive.
Tech Adept
iTrader: (12)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Nooooo!!!! I just got off the phone with Dave at Remote Control Hobbies in Woodinville, and he said they are closing shop!
Good news is he may already have a buyer lined up
![Frown](https://www.rctech.net/forum/classic_images/smilies/frown.gif)
Good news is he may already have a buyer lined up
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I regret to inform everyone that RC Hobbies Woodinville has closed up shop.
However, I will be doing the Tub one last time at the race this Saturday.
I will have Tires, sauce and a few parts in the Tub if anyone needs anything.
However, I will be doing the Tub one last time at the race this Saturday.
I will have Tires, sauce and a few parts in the Tub if anyone needs anything.
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
That sucks to hear that the only local shop to carry anything that's worth a damn is closing. F$@& it I'm now getting getting a traxxas 4tec just so I can get parts locally .
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Sorry to hear that Sean. I've always had great support there. As a previous shop owner, the dollars always have to make cents, if it doesn't make sense, get out. I know for once have always appreciated your efforts!
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Stock TC A main
http://www.youtube.com/watch?v=Blr8EQf0GIM
http://www.youtube.com/watch?v=Blr8EQf0GIM
-Mike