TLR 22-4 THREAD
#1831
Tech Regular
Thread Starter
#1833
#1834
#1835
Tech Regular
Thread Starter
#1837
It works with the old xx4 or xxx4 front wheels, b44 rims never worked on the front of these cars as the hex part in the rim was too deep and would bind up against the bearings.
#1838
losa6102 are the ones from the xx4 and they look the same to me and the shaft is the same diametre as the old car so they should be ok.
peter
peter
#1839
Tech Adept
but they still have a few things in a pinch.
if there was no internet purchasing i would not even attempt my hobbies.
#1840
Tech Regular
iTrader: (4)
Well just got back from the races all i can say is TLR hit a home run, finished building at 3am last night.. about ten laps practice this morning and was in the top 3 qualifying all three rounds, and 2cnd place in the A main, there were 3 22-4's at the track today, top 3 qualifying all 22- 4 and top three A main 22-4.. awesome, well worth the wait...
i must tell the truth, it was a lite day because of the snow storm only 7 entries but still all top 3
i must tell the truth, it was a lite day because of the snow storm only 7 entries but still all top 3
#1842
Tech Champion
iTrader: (34)
Went nuts looking for a fix then later found my clip stuck to my 2.0 hex wrench that had become magnetized. Whew.
I was trying and found an e clip that fit but rubbed the bearing so I put a shim against the bearing then the e clip. Would have worked but I got lucky and found my lost clip.
#1843
Tech Regular
Thread Starter
Finished everything up to day, just need to get the body painted. Got the scales out and weighed it.
Front right: 414g
Front left: 418g
Rear right: 517g
Rear left: 509g
Total: 1854g (front-45%, rear-55%)
Thats pretty good as far as I'm concerned.
Front right: 414g
Front left: 418g
Rear right: 517g
Rear left: 509g
Total: 1854g (front-45%, rear-55%)
Thats pretty good as far as I'm concerned.