5LikesSC10 4x4 Thread
12-18-2011, 12:04 PM
I checked the transmission screws,they're snug and only come through the motor plate by about 1 thread. The motor screws are pretty tight, I bumped them up to the 2.5mm size hex like most of the rest of the truck had so I could avoid stripping then out. How tight should those be?
Last edited by Makarrov; 12-18-2011 at 03:15 PM.
12-18-2011, 12:26 PM
I'm a little over 6 lbs, like 96.2 oz. I'm running 4oz on the left side of the chassis by the transponder mount, .8oz on the left side of the servo and 1oz on the right side of the servo. This made me 50/50 left to right and 44/56 front to rear on my weight distribution. I would like to add a bit more lead in the center chassis in the slots on each side, but I am having trouble getting it in, I dont want to break the sides out.
12-18-2011, 12:39 PM
Tech Regular
iTrader: (14)
body off, I dont think 6lbs 7oz is too heavy losi clams to be 6.75 lbs as a roller so if we get close to that rtr then were still way lighter then them. With motor and all the other electronics I think they roll around 8 lbs.
12-18-2011, 01:18 PM
can someone put a link to the treah of mac the knife sale topic , I cant find it with search couse I dont know the name of the topic
12-18-2011, 02:10 PM
Tech Regular
iTrader: (14)
12-18-2011, 02:19 PM
12-18-2011, 02:27 PM
12-18-2011, 02:31 PM
Exotek chassis
Anyone know where these can be purchased? Stormer has them on order and calling Exotek tomorrow. Only 2 places I found on the net that sells them.
12-18-2011, 02:44 PM
my rtr sc10 4x4 will be here this week any tips or tricks for me thanks
12-18-2011, 03:02 PM
When do you need it?
12-18-2011, 03:08 PM
rx8 help
I was wondering if anyone had any advice,or pics on how and where to mount an rx8 in my truck,with a saddle pack set up...will it fit under the belt drive,or do i have to put it where the reciever goes?
12-18-2011, 03:13 PM
12-18-2011, 04:04 PM
Tech Master
iTrader: (12)
That they will get it right. I do not think a ft version of this truck will be right. Maybe v3
I really think there are too many variables (options) and this is such a different beast that they don't know what will be right for a while. It takes a community to get all the bugs out.
I really think there are too many variables (options) and this is such a different beast that they don't know what will be right for a while. It takes a community to get all the bugs out.
12-18-2011, 04:32 PM
Right on, thanks for the reply
garodisks, swaybars, and these tools.....
12-18-2011, 04:52 PM
