sugs

iTrader: (4)

I'm about 3.25-3.5mm. I do have an extra washer behind the thrust bearing though, don't know if that makes a difference, guessing it does a little. Nice to know a different spring is out there, I hate this spring.

T-BirdJunkie

iTrader: (10)

x100 on all counts. ThunderbirdJunkie is to the point that he's not gonna bother running anything but Orions or Thunder Powers.

CoyoteSlash

iTrader: (8)

I run Hobby People 2S 35C and I love them. There are local Dealer reps who really "talk" like human beings. and want to fix shit for you. Not call centers, 1 guy. I love it; and Cheaper than my venom shit.

But you're absolutely right. T/P all the way. Just wish I could throw down 129.99 for those G6 race packs right now. I like to keep at least an arsenal of 5 packs and... that's a price tag.

Edit: All of my Flight Packs for my Electric Planes are T/P lipos. 65 bucks for 65C 2250's etc. I wish that T/P could get the price anywhere "near" that 70 dollar mark. They'd make a killing off us guys who are tired with this crap.

BLbound

iTrader: (27)

I've been running the Peak 45c packs with great results. I've also tried the turnigy 50-100c packs...they have serious punch!

BLbound

iTrader: (27)

This is a SWEET CHASSIS! This is exactly what I posted about 400 posts ago! It's expensive but it looks very precisely machined...& a hard anodized look to match the shocks...might hav to ask Santa for this one!

T-BirdJunkie

iTrader: (10)

http://www.horizonhobby.com/Products...=THP54002SR35D

It's no 65c G6, but y'know...

Also, blah@no in stock date.

hickwheeler

iTrader: (12)

on their site it says estimated street price of 109.99

ilanstylz

iTrader: (142)

Anyone try out these diff gears?

http://cgi.ebay.com/ws/eBayISAPI.dll...=p5197.c0.m619

And will this pin work for the pin mod?

http://www3.towerhobbies.com/cgi-bin...?&I=LXSKN3&P=7

or this one?

http://www3.towerhobbies.com/cgi-bin...?&I=LXNYZ3&P=7

Or anyone have a direct link to the one you used? Thanks

CoyoteSlash

iTrader: (8)

There's nothing wrong with the gears in the diffs. It's the diff housings that kinda lack.

I used a Traxxas Hinge pin. It doesn't need to get complicated. You can use a wheel pin from your SC10 4x4. But we just beefed up a 'little' bit.

omaha_racing

iTrader: (28)

fully aware

CoyoteSlash

iTrader: (8)

Okay. I feel really dumb asking this.

My Spektrum 6030 JR spline Servo:

It 'will not' align. I am using the transmitter to send the server 20/25 points either direction to get the spline to line up for a vertical mount with the servo horn.

Setting the Transmitter at zero and trying to align the servo to a vertical servo horn is impossible. I have to send the servo so far one direction that it actually loses 'alot' of steering in whatever direction I compensated with. It's seriously sitting at Zero, and exactly 20 points either direction (on transmitter) will make it line up.

I've done hundreds of servo alignments. This servo is pissing. me. off.

anyone have a 6030? Till now i've just pretended I didn't have this problem. Now that my truck is drivable. I'm getting back into this.




Oh. Interesting. I saw the 99.99$ ones a while ago. 45C I think. hmmm. Thanks.

Dano628

I used the wheel pins that came with the truck as I had extra ones from when I replaced the wheel hexs with the FT ones . A 5/64 drill bit fits perfect .

omaha_racing

iTrader: (28)

Im in the same boat with a JR 9100S. Super frustrating!

CoyoteSlash

iTrader: (8)

I literally just took a hammer and pounded the Futaba Servo Horn on it.


I'm an idiot Genius.

BLbound

iTrader: (27)

Hopefully Santa can afford that when the time comes!