SC10 4x4 Thread
#8281
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
So after seeing Marcus' type of slipper discs, I decided to try it on my own before making an upgrade to the slipper.
I had some spare perfboard laying around from the last project I did, and decided to build a slipper.
It's made out of epoxy cast fiberglass, cut with a cutter and a pair of pliers, and drilled with the help of Dad's fellow Makita (12 y o now, but still like new):
![](https://www.rctech.net/forum/attachment.php?attachmentid=818253&stc=1&d=1318168239)
![](https://www.rctech.net/forum/attachment.php?attachmentid=818254&stc=1&d=1318168239)
It works GREAT. The truck doesn't wheelie, but the post-corner throttle has skyrocketed, acceleration has increased a crapload, and it's overall much faster. With the spring set at a more loose setting.
Marcus, can you PM me the price+shipping to 17600 Spain, please? Yours MUST be better than mines, and that means they'll be even more impressive. DO WANT THEM
I had some spare perfboard laying around from the last project I did, and decided to build a slipper.
It's made out of epoxy cast fiberglass, cut with a cutter and a pair of pliers, and drilled with the help of Dad's fellow Makita (12 y o now, but still like new):
It works GREAT. The truck doesn't wheelie, but the post-corner throttle has skyrocketed, acceleration has increased a crapload, and it's overall much faster. With the spring set at a more loose setting.
Marcus, can you PM me the price+shipping to 17600 Spain, please? Yours MUST be better than mines, and that means they'll be even more impressive. DO WANT THEM
![Stick Out Tongue](https://www.rctech.net/forum/classic_images/smilies/tongue.gif)
#8282
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Exp. Pro 4 Short Course
***1) Cavalieri, Ryan (17/5:13.603 R3)
***2) Maifield, Ryan (17/5:14.002 R3)
***3) Truhe, Mike (17/5:15.533 R3)
***4) Evans, Dustin (17/5:18.069 R3)
***5) Hartson, Steven (16/5:03.730 R3)
***6) Amezcua, Travis (16/5:04.072 R3)
***7) Turner, Cody (16/5:04.502 R3)
***8) Wernimont, Carson (16/5:08.497 R3)
***9) Bradley, Chad (16/5:10.903 R3)
***10) Phend, Dakotah (16/5:15.815 R3)
***11) Moller, Drew (15/5:00.134 R3)
***12) Fiege, Brent (15/5:08.322 R3)
looks like the ryans arent having any problems at the reedy truck race of champions ...i bet we will have some set up info after this race ...we will see how the mains go today
***1) Cavalieri, Ryan (17/5:13.603 R3)
***2) Maifield, Ryan (17/5:14.002 R3)
***3) Truhe, Mike (17/5:15.533 R3)
***4) Evans, Dustin (17/5:18.069 R3)
***5) Hartson, Steven (16/5:03.730 R3)
***6) Amezcua, Travis (16/5:04.072 R3)
***7) Turner, Cody (16/5:04.502 R3)
***8) Wernimont, Carson (16/5:08.497 R3)
***9) Bradley, Chad (16/5:10.903 R3)
***10) Phend, Dakotah (16/5:15.815 R3)
***11) Moller, Drew (15/5:00.134 R3)
***12) Fiege, Brent (15/5:08.322 R3)
looks like the ryans arent having any problems at the reedy truck race of champions ...i bet we will have some set up info after this race ...we will see how the mains go today
![Wink](https://www.rctech.net/forum/classic_images/smilies/wink.gif)
#8283
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Holy crap!!! one and a half a second better than the third!!
Or this guys are amazing drivers (which I do not doubt) or they've done something to the SC10
Or this guys are amazing drivers (which I do not doubt) or they've done something to the SC10
![EEK!](https://www.rctech.net/forum/classic_images/smilies/eek.gif)
#8284
Tech Rookie
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I have friends who went to the ROAR Nats and the rules say you can do a lot of things in "Mod" class... My friend was saying that the Team SC10 4x4's had some "Not available" aftermarket items on them...
#8285
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
#8286
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
RC's truck has saddle packs and a carbon fiber tube brace going from the top of the motor area to the front mount. A fan the blows on the motor through a hole cut in the chassis. Not sure of the drivetrain but I am sure there is some kind if slipper fix they are running. Orion has a new 550 motor they are all running so I am sure that helped everyone go faster.
#8287
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
RC's truck has saddle packs and a carbon fiber tube brace going from the top of the motor area to the front mount. A fan the blows on the motor through a hole cut in the chassis. Not sure of the drivetrain but I am sure there is some kind if slipper fix they are running. Orion has a new 550 motor they are all running so I am sure that helped everyone go faster.
![sneaky](https://www.rctech.net/forum/classic_images/smilies/sneaky.gif)
#8288
Tech Master
iTrader: (53)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
RC's truck has saddle packs and a carbon fiber tube brace going from the top of the motor area to the front mount. A fan the blows on the motor through a hole cut in the chassis. Not sure of the drivetrain but I am sure there is some kind if slipper fix they are running. Orion has a new 550 motor they are all running so I am sure that helped everyone go faster.
Sounds just like the same truck Kinwald was running. He said they were passing it around. It's pinned.
#8291
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I won't post pictures from someone's facebook page but it looks like thebigrc posted pictures of it too.
http://www.thebigrc.com/?attachment_id=1735
JP is doing the coverage from the Reedy Race.
http://www.thebigrc.com/?attachment_id=1735
JP is doing the coverage from the Reedy Race.
#8292
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
So after seeing Marcus' type of slipper discs, I decided to try it on my own before making an upgrade to the slipper.
I had some spare perfboard laying around from the last project I did, and decided to build a slipper.
It's made out of epoxy cast fiberglass, cut with a cutter and a pair of pliers, and drilled with the help of Dad's fellow Makita (12 y o now, but still like new):
![](https://www.rctech.net/forum/attachment.php?attachmentid=818253&stc=1&d=1318168239)
![](https://www.rctech.net/forum/attachment.php?attachmentid=818254&stc=1&d=1318168239)
It works GREAT. The truck doesn't wheelie, but the post-corner throttle has skyrocketed, acceleration has increased a crapload, and it's overall much faster. With the spring set at a more loose setting.
Marcus, can you PM me the price+shipping to 17600 Spain, please? Yours MUST be better than mines, and that means they'll be even more impressive. DO WANT THEM![Stick Out Tongue](https://www.rctech.net/forum/classic_images/smilies/tongue.gif)
I had some spare perfboard laying around from the last project I did, and decided to build a slipper.
It's made out of epoxy cast fiberglass, cut with a cutter and a pair of pliers, and drilled with the help of Dad's fellow Makita (12 y o now, but still like new):
It works GREAT. The truck doesn't wheelie, but the post-corner throttle has skyrocketed, acceleration has increased a crapload, and it's overall much faster. With the spring set at a more loose setting.
Marcus, can you PM me the price+shipping to 17600 Spain, please? Yours MUST be better than mines, and that means they'll be even more impressive. DO WANT THEM
![Stick Out Tongue](https://www.rctech.net/forum/classic_images/smilies/tongue.gif)
http://rcshox.com/shoxshop/catalog/i...hp?cPath=23_26
#8294
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I won't post pictures from someone's facebook page but it looks like thebigrc posted pictures of it too.
http://www.thebigrc.com/?attachment_id=1735
JP is doing the coverage from the Reedy Race.
http://www.thebigrc.com/?attachment_id=1735
JP is doing the coverage from the Reedy Race.
![Nodding](https://www.rctech.net/forum/classic_images/smilies/nod.gif)