Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
Tech Adept
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Hi all, what's a good gearing (spur/pinion) to to use with the rtr electronics to try and be as competitive as possible? Should I run 2s or 3s? Thanks
Tech Adept
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
5k in the front will reduce your on power steering from what you had. Don't be afraid to go back to the grease if it works better for you. I ran grease/grease/3k for a while and was actually pretty happy with that. However, 5/7/3 might actually work out for your driving style. I'd try 5/7/3 and make sure you have 1 degree toe out. I've had my ends auto-adjust so that my toe was close to zero or maybe even toe in (hard to know with slop - lol) and it really messed up how my truck turned on power.
Tech Master
iTrader: (9)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
If some havent seen this....This is my little thing of gold!
![](http://i1227.photobucket.com/albums/ee436/TCCustoms/RC%20Pics/difffluids.jpg)
Also...this is getting ridiculous! I mean 4 days from NY to NJ??? These are my nanotechs i was hoping to have monday and still now its been 7 days, maybe within 10?!
Date Status Location
2012-07-16 12:51:00 In Transit ELIZABETH NJ 07206
2012-07-12 20:25:00 In Transit JAMAICA NY 11430
2012-07-12 17:03:58 Departed warehouse JAMAICA NY 11434
2012-07-12 17:01:53 Received at warehouse JAMAICA NY 11434
2012-07-12 11:09:00 Cleared Customs
2012-07-09 16:11:49 Departed warehouse SWISS POST HNG 852
2012-07-09 13:45:28 Received data FOTAN HNG 852
![](http://i1227.photobucket.com/albums/ee436/TCCustoms/RC%20Pics/difffluids.jpg)
Also...this is getting ridiculous! I mean 4 days from NY to NJ??? These are my nanotechs i was hoping to have monday and still now its been 7 days, maybe within 10?!
Date Status Location
2012-07-16 12:51:00 In Transit ELIZABETH NJ 07206
2012-07-12 20:25:00 In Transit JAMAICA NY 11430
2012-07-12 17:03:58 Departed warehouse JAMAICA NY 11434
2012-07-12 17:01:53 Received at warehouse JAMAICA NY 11434
2012-07-12 11:09:00 Cleared Customs
2012-07-09 16:11:49 Departed warehouse SWISS POST HNG 852
2012-07-09 13:45:28 Received data FOTAN HNG 852
Last edited by TCCustoms; 07-17-2012 at 06:36 PM.
Tech Master
iTrader: (1)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I ordered new arms, ti Nitride hinge pins, and inserts. I'll check out how tight they fit and ream them as little as possible if needed. Hopefully that will help get this bad boy dialed in. Even with the slop, I was 4 tenths off of the lap record for this layout, I'm hoping this will help make up a couple of tenths ![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
Thanks for the help guys
![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
Thanks for the help guys
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
Last edited by BmainStar; 07-17-2012 at 06:50 PM. Reason: DANG COMMA
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
If some havent seen this....This is my little thing of gold!
![](http://i1227.photobucket.com/albums/ee436/TCCustoms/RC%20Pics/difffluids.jpg)
Also...this is getting ridiculous! I mean 4 days from NY to NJ??? These are my nanotechs i was hoping to have monday and still now its been 7 days, maybe within 10?!
Date Status Location
2012-07-16 12:51:00 In Transit ELIZABETH NJ 07206
2012-07-12 20:25:00 In Transit JAMAICA NY 11430
2012-07-12 17:03:58 Departed warehouse JAMAICA NY 11434
2012-07-12 17:01:53 Received at warehouse JAMAICA NY 11434
2012-07-12 11:09:00 Cleared Customs
2012-07-09 16:11:49 Departed warehouse SWISS POST HNG 852
2012-07-09 13:45:28 Received data FOTAN HNG 852
![](http://i1227.photobucket.com/albums/ee436/TCCustoms/RC%20Pics/difffluids.jpg)
Also...this is getting ridiculous! I mean 4 days from NY to NJ??? These are my nanotechs i was hoping to have monday and still now its been 7 days, maybe within 10?!
Date Status Location
2012-07-16 12:51:00 In Transit ELIZABETH NJ 07206
2012-07-12 20:25:00 In Transit JAMAICA NY 11430
2012-07-12 17:03:58 Departed warehouse JAMAICA NY 11434
2012-07-12 17:01:53 Received at warehouse JAMAICA NY 11434
2012-07-12 11:09:00 Cleared Customs
2012-07-09 16:11:49 Departed warehouse SWISS POST HNG 852
2012-07-09 13:45:28 Received data FOTAN HNG 852
Tech Regular
iTrader: (45)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
If some havent seen this....This is my little thing of gold!
![](http://i1227.photobucket.com/albums/ee436/TCCustoms/RC%20Pics/difffluids.jpg)
Also...this is getting ridiculous! I mean 4 days from NY to NJ??? These are my nanotechs i was hoping to have monday and still now its been 7 days, maybe within 10?!
Date Status Location
2012-07-16 12:51:00 In Transit ELIZABETH NJ 07206
2012-07-12 20:25:00 In Transit JAMAICA NY 11430
2012-07-12 17:03:58 Departed warehouse JAMAICA NY 11434
2012-07-12 17:01:53 Received at warehouse JAMAICA NY 11434
2012-07-12 11:09:00 Cleared Customs
2012-07-09 16:11:49 Departed warehouse SWISS POST HNG 852
2012-07-09 13:45:28 Received data FOTAN HNG 852
![](http://i1227.photobucket.com/albums/ee436/TCCustoms/RC%20Pics/difffluids.jpg)
Also...this is getting ridiculous! I mean 4 days from NY to NJ??? These are my nanotechs i was hoping to have monday and still now its been 7 days, maybe within 10?!
Date Status Location
2012-07-16 12:51:00 In Transit ELIZABETH NJ 07206
2012-07-12 20:25:00 In Transit JAMAICA NY 11430
2012-07-12 17:03:58 Departed warehouse JAMAICA NY 11434
2012-07-12 17:01:53 Received at warehouse JAMAICA NY 11434
2012-07-12 11:09:00 Cleared Customs
2012-07-09 16:11:49 Departed warehouse SWISS POST HNG 852
2012-07-09 13:45:28 Received data FOTAN HNG 852
Tech Master
iTrader: (9)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
well i know you didnt call Hobbyking since you cant call them so im assuming your trying to be a wiseguy![sneaky](https://www.rctech.net/forum/classic_images/smilies/sneaky.gif)
It better be long before that since i paid for the EMS shipping which said "EMS Express : 3-4 Days transit time. (Incl. Tracking + Registration)"
![sneaky](https://www.rctech.net/forum/classic_images/smilies/sneaky.gif)
It better be long before that since i paid for the EMS shipping which said "EMS Express : 3-4 Days transit time. (Incl. Tracking + Registration)"
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I just ordered some nanos from the usa warehouse. I opted for the 2-3 day shipping since it was only a dollar more than the 3-5 day. We shall see if it really does get here in 2-3 days (doubt it).
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
As far as the 2s or 3s, I would just settle on getting a 2s. Pretty much anywhere you are going to go and race you are going to be limited to 2s. There are the random tracks around that will let you race 3s, but if you are planning on going to different tracks in the future, get used to the 2s. Plus, if you are wanting to go to any of the bigger races, you aren't allowed to run a 3s. It's just my opinion that 2s is fast enough on a racetrack.
Hope this helps a little.
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Honestly, I wouldn't run a 14T on the rtr motor. That motor is a 550 4pole 2800kv. A 14T on it would have TONS of low end to the point that it would probably just spin all over the place. I'm pretty sure it comes with an 18T stock, and to be honest with you, all you need to do to the truck to be really competitive is to change to a better servo.
As far as the 2s or 3s, I would just settle on getting a 2s. Pretty much anywhere you are going to go and race you are going to be limited to 2s. There are the random tracks around that will let you race 3s, but if you are planning on going to different tracks in the future, get used to the 2s. Plus, if you are wanting to go to any of the bigger races, you aren't allowed to run a 3s. It's just my opinion that 2s is fast enough on a racetrack.
Hope this helps a little.
As far as the 2s or 3s, I would just settle on getting a 2s. Pretty much anywhere you are going to go and race you are going to be limited to 2s. There are the random tracks around that will let you race 3s, but if you are planning on going to different tracks in the future, get used to the 2s. Plus, if you are wanting to go to any of the bigger races, you aren't allowed to run a 3s. It's just my opinion that 2s is fast enough on a racetrack.
Hope this helps a little.
Tech Master
iTrader: (244)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I just ordered some too but my experience has been that it takes the same amount of time as from the International warehouse, 6 days from order date. That 2-3 days is only shipping time, it doesn't take into account the time it takes for them to pull the inventory, package it up, and actually ship it.
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
When I order from the International warehouse it's usually 6 days, from the order date, using EMS Express.
I just ordered some too but my experience has been that it takes the same amount of time as from the International warehouse, 6 days from order date. That 2-3 days is only shipping time, it doesn't take into account the time it takes for them to pull the inventory, package it up, and actually ship it.
I just ordered some too but my experience has been that it takes the same amount of time as from the International warehouse, 6 days from order date. That 2-3 days is only shipping time, it doesn't take into account the time it takes for them to pull the inventory, package it up, and actually ship it.
Last edited by Rockthecatbox21; 07-17-2012 at 08:41 PM. Reason: congrats
Tech Addict
iTrader: (34)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
I have never reamed my arms even with the stock pins,I just sanded the pins a little.The new pins will ride in the arms much better,You( should) not have to ream any thing,but plastic does get weird when You mold it and You need to check it .With the shocks off the towers,they should flop up and down very nicely!Next step is get the Hard Ano balls and new rod ends with the (8) ti turn buckles, really takes some of the front end slop out!!Good luck with that lap record!!Wait do You race at Tonys hobbies??I think I had the record LOL![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
I race at SCVRC used to be called One11Raceway, but changed ownership recently, it's an indoor clay track in Valencia