Tamiya FF03 Pro
11-11-2019, 09:01 PM
#1
Tamiya FF03 Pro
- SOLD - Tamiya FF-03 Pro.
This car has been assembled but has never been run so it is in excellent condition. This car has been assembled with many optional parts beyond what was originally fitted on the FF-03 Pro model ( all the original parts are included also ). There is no radio or electronics included. The car has the wheels included with this kit but will require tires/inserts. The original Shocks are included in the parts, I haven’t yet assembled them. The original box, manual, decal sheet are all included. I have included a body shell with this sale, see post #2 - VW Golf GTI W12
Below is a list of the additional parts I have built this car with ( again, all original parts are included ). I have assembled this car as per Rod Canare’s 2010 TCS North America winning car ( minus body, electronics, and a couple of other items, see link for Rod's car featured on PetitRc - http://site.petitrc.com/reglages/tam...anare_TCS2010/ )
1x 84130 FF03 Titanium Screw Set
1x 54226 RC FF03 3/32 Tungsten Ball -12pcs
1x 53539 5.5 Aluminium Spacer Set
1x 53709 FL coated Suspension Ball
1x 53646 Wheel Spacers
1x 53570 Clamp Type Aluminium Wheel Hub (4mm)
1x 53823 Clamp Type Aluminium Wheel Hub (5mm)
1x 53884 TA05 Carbon Battery Plate Set
2x 53851 46mm Titanium Coated Suspension Shaft
1x 53933 Aluminium Suspension Mount Spacers
1x 53500 Assembly Universal Shaft Cross Joint
1x 53724 Aluminium 46mm Swing Shaft
1x 54076 TB03 Wheel Axles
1x 54233 FF03 Aluminium Diff Joint Set
1x 54235 Aluminium Racing Steering
2x 54071 Aluminium Suspension Mount (1C)
1x 54067 Aluminium Suspension Mount (1XA)
1x 54072 Aluminium Suspension Mount (1D)
1x 54075 TB-03 Ball Head King Pin (Fluorine Coated)
1x 53992 TA05-IFS Rocker Nut - Aluminium
1x 53924 DF03 Heat Sink Bar
1x 53917 2.6mm Titanium Suspension Shaft - For Reversible Suspension
1x 54090 TB-03 Aluminium Servo Stay (Right)
1x 54091 TB-03 Aluminium Servo Stay (Left)
1x 54183 Reinforced Freewheel Axle Set - M-Chassis
1x 51332 TRF416 Front Upright
1x 51333 TRF416 Rear Upright
2x 53928 Short Reversible Suspension Arm
1x 54031 TA05-IFS F Parts - Hub Carrier 4 Degrees, Hard
2x 53907 5x8mm Aluminium Ball Connector - Hex Head
Thanks for looking,
Daniel
This car has been assembled but has never been run so it is in excellent condition. This car has been assembled with many optional parts beyond what was originally fitted on the FF-03 Pro model ( all the original parts are included also ). There is no radio or electronics included. The car has the wheels included with this kit but will require tires/inserts. The original Shocks are included in the parts, I haven’t yet assembled them. The original box, manual, decal sheet are all included. I have included a body shell with this sale, see post #2 - VW Golf GTI W12
Below is a list of the additional parts I have built this car with ( again, all original parts are included ). I have assembled this car as per Rod Canare’s 2010 TCS North America winning car ( minus body, electronics, and a couple of other items, see link for Rod's car featured on PetitRc - http://site.petitrc.com/reglages/tam...anare_TCS2010/ )
1x 84130 FF03 Titanium Screw Set
1x 54226 RC FF03 3/32 Tungsten Ball -12pcs
1x 53539 5.5 Aluminium Spacer Set
1x 53709 FL coated Suspension Ball
1x 53646 Wheel Spacers
1x 53570 Clamp Type Aluminium Wheel Hub (4mm)
1x 53823 Clamp Type Aluminium Wheel Hub (5mm)
1x 53884 TA05 Carbon Battery Plate Set
2x 53851 46mm Titanium Coated Suspension Shaft
1x 53933 Aluminium Suspension Mount Spacers
1x 53500 Assembly Universal Shaft Cross Joint
1x 53724 Aluminium 46mm Swing Shaft
1x 54076 TB03 Wheel Axles
1x 54233 FF03 Aluminium Diff Joint Set
1x 54235 Aluminium Racing Steering
2x 54071 Aluminium Suspension Mount (1C)
1x 54067 Aluminium Suspension Mount (1XA)
1x 54072 Aluminium Suspension Mount (1D)
1x 54075 TB-03 Ball Head King Pin (Fluorine Coated)
1x 53992 TA05-IFS Rocker Nut - Aluminium
1x 53924 DF03 Heat Sink Bar
1x 53917 2.6mm Titanium Suspension Shaft - For Reversible Suspension
1x 54090 TB-03 Aluminium Servo Stay (Right)
1x 54091 TB-03 Aluminium Servo Stay (Left)
1x 54183 Reinforced Freewheel Axle Set - M-Chassis
1x 51332 TRF416 Front Upright
1x 51333 TRF416 Rear Upright
2x 53928 Short Reversible Suspension Arm
1x 54031 TA05-IFS F Parts - Hub Carrier 4 Degrees, Hard
2x 53907 5x8mm Aluminium Ball Connector - Hex Head
Thanks for looking,
Daniel
Last edited by $$$...; 01-08-2020 at 05:02 PM. Reason: Added a body shell to the sale items
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
