Huge sellout-Tires, Radio, Motors. chargers,Lathe, chassis'
01-20-2006, 01:02 PM
#1
Huge sellout-Tires, Radio, Motors. chargers,Lathe, chassis'
I am just getting rid of a lot of stuff I don't need or use.It is all in great condition unless otherwise noted.I accept paypal and am verified.The items I am looking for in a trade are complete M8 Spek system, or an AC/DC charger that can charge at least 6 amps,
NEWLY ADDED JR Z4750 race servo. This is a $90 at horizon and has preformed great for me.I just replaced most of the gears and It comes with almost 2 sets of extras. The wire has a very small fray in it but otherwise is perfect. .12 speed with +/- 110 oz of torque. Price $40 shipped
-Novak GT7 in amazing condtion/Works perfect, wires barely fit a T4 but are plenty long for most vehicles.Jumper is very neatly dont and this is an amazing ESC.Diode has ziptie fastener, On/off switch is close to new and wire is long for any mounting positions, and I am including 2 reciever wires(one 4inchish one for onroad, and a 8ish in. one for offroad vehicles.
Price-SOLD
1-Airtronics MX3 FM radio and 92836 Super Micro reciever.It comes with a set of channel 79 crystals and is 75Mhz.This Radio looks and works like new.I'll throw in a set of Energizer AA's to get ya started.SOLD
2.Team Orion Lathe with diamond bit.I'm unsure the model number but it works fantastic with 15-20 cuts on this bitSOLD
3.Dynamite Prophet plus charger.Charges up to 4 amps and is wired for deans.Price-$20+Shipping
4.MRC superbrain 959.Turns on and screen works but when "charging" a battery the volts stay under 7.5 and the battery never gets charged.I have all paperwork and I'm sure MRC would fix easily.Price-$12+Shipping
ALL MOTORS COME WITH MOTOR TUBES
5.Reedy PT 10x1 with 2 skims on the comm and original brushes still have good life in em.I'll throw in the 18tooth pinion because my .050 wrench is broken so I can't get it off
SOLD
6.Reedy MVP.Fresh 767's and comm wear is amazingly even.Comm at Aprox. .280.Price-$10+Shipping
7.Fantom 19t with comm at .271.Needs a new Arm but Can and endbell are great.Would be an excellent Basher motor too.Price-$10+Shipping
8.D3 and 16x4 random.No idea where the comms are at and both come with serrated brushes at full length but no springs.I have no idea if they work or not.-Price-$6/ea +Shipping
9.Novak XXL for Futaba 75mhz.Works fine-SOLD, Thanks Adam
10.JR R125 AM works fine.Price-SOLD thanks alex
11.2 sets 75mhz JR AM crystals 73 and 78 I believe.SOLD thanks alex
12.JR Rs300.Doesn't work and on 27mhz.Price-$10+shipping
All of the following tires are mounted on AE truck rims.
13.Front Holeshots.I have 4-5 pr. of these with ONE RUN each.They are in 100% perfect condition with absolutely no tread loss.Some with firm foams some with stock foams.I got these in a trade from a very dumb/very rich guy who thought he mounted them on rear wheels
.These work at a lot of tracks where extra steering is needed.Price-$13+Shipping/pr.
14.Front Step Pins(got in same trade and same reason above) in 100% perfect condition.Also a set of rear IMFAR Studs with 4 runs on them.Price-$16+Shipping for both
15.T4 Graphite chassis brand new.Price-$15+Shipping
16.T1R composite chassis + body posts used.Price-10+shipping
17.2 T4 diffs with standard outdrives.I have enough other trans parts that I can build you a complete Trans if you want.Price-Make offer
Thanks for looking and please feel free to PM me or email me at [email protected] . Paypal is gladly accepted along with MO.I ship USPS Priority and can add insurance or Delivery conf. If needed.
Steve LaPierre
NEWLY ADDED JR Z4750 race servo. This is a $90 at horizon and has preformed great for me.I just replaced most of the gears and It comes with almost 2 sets of extras. The wire has a very small fray in it but otherwise is perfect. .12 speed with +/- 110 oz of torque. Price $40 shipped
-Novak GT7 in amazing condtion/Works perfect, wires barely fit a T4 but are plenty long for most vehicles.Jumper is very neatly dont and this is an amazing ESC.Diode has ziptie fastener, On/off switch is close to new and wire is long for any mounting positions, and I am including 2 reciever wires(one 4inchish one for onroad, and a 8ish in. one for offroad vehicles.
Price-SOLD
1-Airtronics MX3 FM radio and 92836 Super Micro reciever.It comes with a set of channel 79 crystals and is 75Mhz.This Radio looks and works like new.I'll throw in a set of Energizer AA's to get ya started.SOLD
2.Team Orion Lathe with diamond bit.I'm unsure the model number but it works fantastic with 15-20 cuts on this bitSOLD
3.Dynamite Prophet plus charger.Charges up to 4 amps and is wired for deans.Price-$20+Shipping
4.MRC superbrain 959.Turns on and screen works but when "charging" a battery the volts stay under 7.5 and the battery never gets charged.I have all paperwork and I'm sure MRC would fix easily.Price-$12+Shipping
ALL MOTORS COME WITH MOTOR TUBES
5.Reedy PT 10x1 with 2 skims on the comm and original brushes still have good life in em.I'll throw in the 18tooth pinion because my .050 wrench is broken so I can't get it off
SOLD6.Reedy MVP.Fresh 767's and comm wear is amazingly even.Comm at Aprox. .280.Price-$10+Shipping
7.Fantom 19t with comm at .271.Needs a new Arm but Can and endbell are great.Would be an excellent Basher motor too.Price-$10+Shipping
8.D3 and 16x4 random.No idea where the comms are at and both come with serrated brushes at full length but no springs.I have no idea if they work or not.-Price-$6/ea +Shipping
9.Novak XXL for Futaba 75mhz.Works fine-SOLD, Thanks Adam
10.JR R125 AM works fine.Price-SOLD thanks alex
11.2 sets 75mhz JR AM crystals 73 and 78 I believe.SOLD thanks alex
12.JR Rs300.Doesn't work and on 27mhz.Price-$10+shipping
All of the following tires are mounted on AE truck rims.
13.Front Holeshots.I have 4-5 pr. of these with ONE RUN each.They are in 100% perfect condition with absolutely no tread loss.Some with firm foams some with stock foams.I got these in a trade from a very dumb/very rich guy who thought he mounted them on rear wheels
.These work at a lot of tracks where extra steering is needed.Price-$13+Shipping/pr.14.Front Step Pins(got in same trade and same reason above) in 100% perfect condition.Also a set of rear IMFAR Studs with 4 runs on them.Price-$16+Shipping for both
15.T4 Graphite chassis brand new.Price-$15+Shipping
16.T1R composite chassis + body posts used.Price-10+shipping
17.2 T4 diffs with standard outdrives.I have enough other trans parts that I can build you a complete Trans if you want.Price-Make offer
Thanks for looking and please feel free to PM me or email me at [email protected] . Paypal is gladly accepted along with MO.I ship USPS Priority and can add insurance or Delivery conf. If needed.
Steve LaPierre
Last edited by Stevietd14; 03-12-2006 at 07:50 PM. Reason: Added what trades I would take
01-21-2006, 10:19 AM
#6
lathe
pm sent
01-21-2006, 10:54 AM
#7
I'm interested in the Orion Lathe...
Please email me pictures at [email protected] also sent you PM.
Please email me pictures at [email protected] also sent you PM.
01-23-2006, 05:52 PM
#10
1-Airtronics MX3 FM radio and 92836 Super Micro reciever.It comes with a set of channel 79 crystals and is 75Mhz.This Radio looks and works like new.I'll throw in a set of Energizer AA's to get ya started.Price-$60+Shipping.
10.JR R125 AM works fine.Price-$10+shipping
11.2 sets 75mhz JR AM crystals 73 and 78 I believe.Price-$12+shipping for both
[COLOR=DarkRed]can i get pic's of these please...and the MX3 is a 3channel system,right?
[email protected]
or
[email protected][/COLOR]
10.JR R125 AM works fine.Price-$10+shipping
11.2 sets 75mhz JR AM crystals 73 and 78 I believe.Price-$12+shipping for both
[COLOR=DarkRed]can i get pic's of these please...and the MX3 is a 3channel system,right?
[email protected]
or
[email protected][/COLOR]
