CTX, Maxx 707, TB-02R, SRX, XS3 Pro, Speedos, Power Supplies, and more!!!
#1
IRS Rugrat, Maxx 707, TB02R, SRX, XS3 Pro, Terra Crusher, Power Supply, and more!!!
OK, I just moved into a new house and I have decided there are things that I just don't use/need so it's gotta go!
GM V12WXC ESC
No motor limit, it's been used only with Stock motors or in its current chassis, a Mini-T. SOLD
Tamiya TB-02R With tons of extras!
I bought the TB-02R and a used TB-Evo 3 at about the same time. I bought the Evo to steal the key parts off of such as aluminum suspension arm mounts, upper aluminum camber link mounts, front one-way, graphite front and rear shock towers, and more. The Evo actually came with 2 different chassis, the standard 2.5mm chassis and a special SSG lower chassis as well. Asking $200 with KO 2173 servo.
Prolux 7-amp power supply
This is a nice small power supply that will work well with a Pit Bull, Orion Motor Performance Monitor, or a Turbo 35. SOLD
LRP Runner AI Reverse
Basically NIP, included connectors still in place. SOLD
Maxx Racing 707 Sedan
Very low running on this car. It's pretty similar to the TRF 414 or the older FK kits. The car is box stock, asking $125
Hitec SRX w/receiver (Channel 62)
Works well, just no need for it. SOLD
Duratrax Evader ST
This truck was run by my stepson for a few weeks until he lost interest. The stock servo was swapped out for a JR Z270 servo. A lot of aluminum performance hop-ups, heat sink motor mount, Pro-line rear tires, and more. Comes with ESC and receiver, I have the radio somewhere, just need to find it. SOLD
JR XS3 Pro
Just like the SRX, it works awesome, but I have a Z-1. Comes with RS300 receiver (not pictured) SOLD
JR XR3i-
75mhz, asking $55
KO Handheld Programmer for VFS-2000- SOLD
Venom Racing 19T and brushes- SOLD
Tamiya Tom's Toyota Body- $sold
Much More CTX V3.0
It works perfectly except the optical sensor has never worked. I am sure if you just send it into TMM you should be able to get it repaired. sold
MRC RT-4 and RT-4 Pro
2 trucks in one. One engine included, needs to be setup in the truck so that the brake and cluch actuate properly. Asking $75TOTAL FOR BOTH!!!!
Only trades that will be considered would be for an MF2. Buyer to pay actual shipping charges. There will be more to come as well, I just have to look through the rest of my stuff.
GM V12WXC ESC
No motor limit, it's been used only with Stock motors or in its current chassis, a Mini-T. SOLD
Tamiya TB-02R With tons of extras!
I bought the TB-02R and a used TB-Evo 3 at about the same time. I bought the Evo to steal the key parts off of such as aluminum suspension arm mounts, upper aluminum camber link mounts, front one-way, graphite front and rear shock towers, and more. The Evo actually came with 2 different chassis, the standard 2.5mm chassis and a special SSG lower chassis as well. Asking $200 with KO 2173 servo.
Prolux 7-amp power supply
This is a nice small power supply that will work well with a Pit Bull, Orion Motor Performance Monitor, or a Turbo 35. SOLD
LRP Runner AI Reverse
Basically NIP, included connectors still in place. SOLD
Maxx Racing 707 Sedan
Very low running on this car. It's pretty similar to the TRF 414 or the older FK kits. The car is box stock, asking $125
Hitec SRX w/receiver (Channel 62)
Works well, just no need for it. SOLD
Duratrax Evader ST
This truck was run by my stepson for a few weeks until he lost interest. The stock servo was swapped out for a JR Z270 servo. A lot of aluminum performance hop-ups, heat sink motor mount, Pro-line rear tires, and more. Comes with ESC and receiver, I have the radio somewhere, just need to find it. SOLD
JR XS3 Pro
Just like the SRX, it works awesome, but I have a Z-1. Comes with RS300 receiver (not pictured) SOLD
JR XR3i-
75mhz, asking $55
KO Handheld Programmer for VFS-2000- SOLD
Venom Racing 19T and brushes- SOLD
Tamiya Tom's Toyota Body- $sold
Much More CTX V3.0
It works perfectly except the optical sensor has never worked. I am sure if you just send it into TMM you should be able to get it repaired. sold
MRC RT-4 and RT-4 Pro
2 trucks in one. One engine included, needs to be setup in the truck so that the brake and cluch actuate properly. Asking $75TOTAL FOR BOTH!!!!
Only trades that will be considered would be for an MF2. Buyer to pay actual shipping charges. There will be more to come as well, I just have to look through the rest of my stuff.
Last edited by RCGaryK; 01-22-2006 at 01:34 PM.
#7
Tech Master
iTrader: (14)
Gary:
Hi,
I'm interested in your KO handheld programer. Please sent more Pics to [email protected]
Thanks
Hi,
I'm interested in your KO handheld programer. Please sent more Pics to [email protected]
Thanks
#13
#16
I want your Evader ST please
Gary,
I'm getting into RC. I made you an offer over on RCU. When we come into agreement I am also interested in the Venom 19T motor and brushes. Will the
XR3i radio work with this? or just the one that come with the truck.
I'm getting into RC. I made you an offer over on RCU. When we come into agreement I am also interested in the Venom 19T motor and brushes. Will the
XR3i radio work with this? or just the one that come with the truck.
#18
I want your Evader ST please
Gary, $85 for Evader St, Radio (transmitter), Venom motor and brushes + shipping. ?
#20
I want your Evader ST please
Gary, I meant that I will pay for shipping beyond the $85.00
#23
Sorry, I don't do PayPal anymore. I sold my Fantom dyno and laptop on here but took payment thru PP and the guy used a fraudulent Credit card to pay me. It took a couple weeks but once PP caught up with things I had a $500 hole in my PP account and I was out a Dyno and Laptop and Paypal wouldn't help. I can send you my address and if you send me yours I will calculate the shipping charge for you.
#24
I'll take the srx if you still have it.
#26
I just bought one and never used it yet. I would return it if I could get yours.
#28
OK, time to update the list...I gotta admit my wife is right, I have too much stuff
Niftech Tweak Station- $20
Prolux Charger- Similar to the Dynamite Prophet chargers- SOLD
IRS Rugrat- This is a pretty complete package. Comes with 3 Fusion 3700 4-cell packs (445@ 1.182, 442 @ 1.184, 445 @ 1.181), 3 bodies 1 unpainted, a box of spares with different front and center springs, several sets of tires and more. A steal at only $175
Orion Core Touring (Blue Label, 10x1)- $20
Speed Gems Pro Amber w/P94 brush hoods- $12
Orion Core Modified (Orange Label, 12x3)- $20
Reedy KR (12x2)- $25
Tamiya Terra Crusher- Comes with Forward Only Conversion installed. It seems like the clutch bell shoes may need to be replaced. I bought it used and haven't run more than 1/4 tank thru it. It fires right up, idles strong. It also needs a 2.6mm screw for the steering servo saver. The Throttle servo has been replaced with a Hitec unit. Asking $220
GS Storm RTR Plus1/8th Buggy- This is a pretty nice buggy. The engine still has very good compression. It does need a cleaning and it is missing the hatch for the radio box (Part Number: GS-ST058, about $10). Comes with JR Z590 steering servo and a standard GS servo for throttle and brakes. Includes a Futaba 2PH 75MHZ transmitter and receiver. Asking $220
Niftech Tweak Station- $20
Prolux Charger- Similar to the Dynamite Prophet chargers- SOLD
IRS Rugrat- This is a pretty complete package. Comes with 3 Fusion 3700 4-cell packs (445@ 1.182, 442 @ 1.184, 445 @ 1.181), 3 bodies 1 unpainted, a box of spares with different front and center springs, several sets of tires and more. A steal at only $175
Orion Core Touring (Blue Label, 10x1)- $20
Speed Gems Pro Amber w/P94 brush hoods- $12
Orion Core Modified (Orange Label, 12x3)- $20
Reedy KR (12x2)- $25
Tamiya Terra Crusher- Comes with Forward Only Conversion installed. It seems like the clutch bell shoes may need to be replaced. I bought it used and haven't run more than 1/4 tank thru it. It fires right up, idles strong. It also needs a 2.6mm screw for the steering servo saver. The Throttle servo has been replaced with a Hitec unit. Asking $220
GS Storm RTR Plus1/8th Buggy- This is a pretty nice buggy. The engine still has very good compression. It does need a cleaning and it is missing the hatch for the radio box (Part Number: GS-ST058, about $10). Comes with JR Z590 steering servo and a standard GS servo for throttle and brakes. Includes a Futaba 2PH 75MHZ transmitter and receiver. Asking $220
Last edited by RCGaryK; 01-20-2006 at 03:54 PM.