RC Chassis for Sale...

Old 06-08-2005, 04:04 PM
  #1  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default RC Cleanout/Blowout...

Selling a few of my chassis and other stuff, just because I don't have the time for to keep them all. My loss will be your gain in all of these cars and parts.

1st Car. ------SOLD!!!------
Okay, I have to let go of my Pro4 I am asking $210 shipped w/insurance to any of the lower 48 US states. It has been modified a little, got battery slots beveled, upper deck fixed so that the steering rack won't tweak, TiR Ti front and rear input shafts(machined aluminum), 1.1 gear pack from HPI (not installed), replaced a few of the hub carrier bearings. It has two xtra diffs, some used Square parts, and open spares, extra arms, bumper and body mounts. Included will be a Hitec 5925 Dig Servo already mounted, and a plain white Mazada 6 body trimmed out, no decals. PM me if you have any questions. I AM NOT WILLING TO PART ANYTHING OUT. I want to sell the whole thing together. Thanks.

Here's what is included:

NIP Parts:
-Jwerk screw pack (an xtra)
-4 packs of ball studs
-2 packs of 3mm spacers
-2 packs of 2mm spacers
-2 packs of 0.75mm spacers
-2 packs of bevel gears
-Pivot blocks of 1 and 2 degrees
-Pivot block spacers
-1 pack of diff rings
-1 pack of diff balls
-1 pack of delrin pivot balls
-2 packs of delrin outdrives
-3 packs of F/R hub carriers
-1 pack of Sqaure rear hub
-1 pack of Sqaure front hub
-1 pack of Square Ti input shafts front and rear
------SOLD!!!------

2nd Car. ------SOLD!!!------
FT TC3, hardly used comes with alot of spare parts, and I will include the Hitec 5925 Dig Servo in the pics. It has RPM Ballcups, Hardcore Racing input cups front and rear, and the centershaft as well. Has a one-way up front and diff in the rear. I am asking $150 for the whole thing. I AM NOT WILLING TO PART OUT. ------SOLD!!!------

3rd Car.------SOLD!!!------
Yokomo CGM, converted from an SD, it has the following hopups, Tobee Craft front/rear input shafts, spur gear holder, center shaft, and spring retainers. And RPM ballcups. Has Ti 90% Ti screws. The extras that will be included are 3 packs of king pins, 1 pack of body posts, 2 packs of screws that hold the pivot pin for the hubs, 1 pack of arms, 1 pack of c-hubs, 1 pack of hub carriers, suspension mount set, 1 pair of green springs, and 1 pair of pink springs. THIS IS FOR THE ROLLING CHASSIS, NO ELECTRONICS INCLUDED. I am asking $255 for the chassis.
------SOLD!!!------

4th car. ------SOLD!!!------
Yokomo SD converted to Rayspeed chassis. It has the follwoing hopups, RPM ballcups, Yokomo hardened alum front/rear input shafts, Rayspeed spring retainers, and 1st generation carbon shaft. Has 90% Ti screws, and some blue aluminum screws. I will include an extra shaft, plus additional goodies which are 3 packs of king pins, 1 pack of body posts, 2 packs of screws that hold the pivot pin for the hubs, 1 pack of arms, 1 pack of c-hubs, 1 pack of hub carriers, suspension mount set, 1 pair of green springs, and 1 pair of pink springs. THIS IS FOR THE ROLLING CHASSIS, NO ELECTRONICS INCLUDED. I am asking $255 for the chassis.
------SOLD!!!------

5th.
CGM Conversion. Its New In Box, never opened. Asking $40 shipped.
Here's the link:CGM Conversion Go to the last set of photos.

6th.------SOLD!!!------
Rayspeed Conversion. Opened, never used, edges have been filed and sealed with CA. Asking $70 shipped.
------SOLD!!!------

7th. ------SALE PENDING------
Mugen MTX-3 Parts, found some NIP parts that I no longer need. Selling the whole thing as a bundle for $135 shipped.

2 Clutch sets (As in 90% clutch assembly w/o the gears)
1 Front belt
1 Rear belt
1 Side belt
2 Front hub carriers
2 Diff gear sets w/o spacers
2 Diff gaskets
2 Cup joints (For Differential)
1 Teflon brake pad set

Here's the link: Mugen MTX-3 Parts ------SALE PENDING------

8th.
Selling a NIP LRP Pulsar Charger. I am asking $80 shipped.
Here's the link: LRP Pulsar

9th.------SOLD!!!------
Selling TWO Barracuda R2's AS IS for $150 shipped with out the electronics.
------SOLD!!!------

10th.
Selling opened Mugen MT12, ZERO gallons of fuel put through it. Just opened the packaging, checked for any deformations, and applied after run oil to prevent corrosion. I am asking $125 shipped.
Here's a link to: Mugen MT12

11th.
Selling Airtronics M8 Limited NIB. This production run was limited obviously, and it has the following options, black buttons, black handle, and black antenna, and back-lit screen. It comes with either 27 or 75 FM module. I am asking 160 shipped w/insurance.
Here's a link to Airtronics M8 Limited


All prices ARE FIRM, and include shipping. I accept Paypal (Verified Member), and Postal Money Order. I can ship anywhere in the lower 48 US states, and for the international requests, we will have to discuss shipping costs. PM me if you have any questions. And thanks for looking.

Last edited by rc_bam226; 07-04-2005 at 08:44 PM.
rc_bam226 is offline  
Old 06-08-2005, 06:47 PM
  #2  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

Adjusted Pricing
rc_bam226 is offline  
Old 06-08-2005, 08:51 PM
  #3  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

Added additional items to Yokomo descriptions.
rc_bam226 is offline  
Old 06-08-2005, 09:12 PM
  #4  
Tech Regular
 
Join Date: Apr 2005
Posts: 388
Default

do you have any parts that you replaced with the hop-ups you might want to sell? alum/metal parts?
flyingfox is offline  
Old 06-08-2005, 09:23 PM
  #5  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

Originally Posted by flyingfox
do you have any parts that you replaced with the hop-ups you might want to sell? alum/metal parts?
Keep you in mind.
rc_bam226 is offline  
Old 06-09-2005, 11:52 AM
  #6  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

TTT
rc_bam226 is offline  
Old 06-09-2005, 12:31 PM
  #7  
Tech Regular
 
Join Date: Apr 2005
Posts: 388
Default

any updates?
flyingfox is offline  
Old 06-09-2005, 01:39 PM
  #8  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

Originally Posted by flyingfox
any updates?
For what exactly? And added two more items.
rc_bam226 is offline  
Old 06-09-2005, 03:26 PM
  #9  
Tech Elite
iTrader: (10)
 
Roger's Avatar
 
Join Date: Feb 2003
Posts: 2,329
Trader Rating: 10 (100%+)
Default

Bump up for a nice avitar.
Roger is offline  
Old 06-09-2005, 03:28 PM
  #10  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

Originally Posted by Roger
Bump up for a nice avitar.
Let's see if I can improve upon it, pushing the limits of scantily cladness......
rc_bam226 is offline  
Old 06-09-2005, 03:43 PM
  #11  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

Couldn't find anything that would be "clean"
rc_bam226 is offline  
Old 06-09-2005, 04:10 PM
  #12  
Tech Addict
iTrader: (15)
 
hurley081182's Avatar
 
Join Date: Feb 2005
Location: Hampton, VA
Posts: 735
Trader Rating: 15 (100%+)
Default

bump for having to deal with me for what i think was over a month and for having yokomo's . i will get one of your cars but when is the issue....lol
hurley081182 is offline  
Old 06-09-2005, 04:11 PM
  #13  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

You just let me know
rc_bam226 is offline  
Old 06-10-2005, 09:03 AM
  #14  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

bump
rc_bam226 is offline  
Old 06-11-2005, 11:16 AM
  #15  
Tech Master
Thread Starter
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

PM's answered to, and TTT
rc_bam226 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.