Arcadia RC Support Thread + Product Announcements
#1
Arcadia RC Support Thread + Product Announcements
Hi Everyone
Arcadia RC is a new distributor in Australia. We are the exclusive agents in Australia for the following brands:
1. JConcepts (kits & shells)
2. Tekin Electronics (ESC & chargers)
3. Putnam Propulsion (motors & brushes)
4. Tobee Craft (hop ups & parts)
5. Precision Racing Systems (spur & pinion gears)
6. Xenon Racing (accs, run in stations, car stands etc)
7. Finish Line (bearing lube, comm fluid, diff lube)
We also wholesale 3Racing's range of products.
As some may know, JConcepts, Tekin and some other brands were previously distributed in Australia by another establishment. However, Arcadia RC has acquired the new exclusive rights and all emails enquiring about the product should be directed to our new email address:
[email protected] - for orders, price lists etc - dealers only
[email protected] - for product information, release dates etc
Please be informed that we do not sell directly to the public and all sales have to be done through your local hobby store. If your local hobby store does not stock any of our products, please ask them to contact us or drop us an email and we will point you in the right direction.
Besides product announcements, we hope that the public will use this thread to discuss our products, exchange tips, comments etc. If you do have a private query, please do not hesistate to contact us through the PM or the email.
We will try our very best to assist anyone that needs help. We would also like to apologise for the long delay of our products getting released here in Australia due to the new take over etc.
All other information should be on our web site at www.arcadiarc.com which we will be updating by the end of this month as we are expecting all our products to arrive by then.
We will keep you updated...
Thank you
Arcadia RC is a new distributor in Australia. We are the exclusive agents in Australia for the following brands:
1. JConcepts (kits & shells)
2. Tekin Electronics (ESC & chargers)
3. Putnam Propulsion (motors & brushes)
4. Tobee Craft (hop ups & parts)
5. Precision Racing Systems (spur & pinion gears)
6. Xenon Racing (accs, run in stations, car stands etc)
7. Finish Line (bearing lube, comm fluid, diff lube)
We also wholesale 3Racing's range of products.
As some may know, JConcepts, Tekin and some other brands were previously distributed in Australia by another establishment. However, Arcadia RC has acquired the new exclusive rights and all emails enquiring about the product should be directed to our new email address:
[email protected] - for orders, price lists etc - dealers only
[email protected] - for product information, release dates etc
Please be informed that we do not sell directly to the public and all sales have to be done through your local hobby store. If your local hobby store does not stock any of our products, please ask them to contact us or drop us an email and we will point you in the right direction.
Besides product announcements, we hope that the public will use this thread to discuss our products, exchange tips, comments etc. If you do have a private query, please do not hesistate to contact us through the PM or the email.
We will try our very best to assist anyone that needs help. We would also like to apologise for the long delay of our products getting released here in Australia due to the new take over etc.
All other information should be on our web site at www.arcadiarc.com which we will be updating by the end of this month as we are expecting all our products to arrive by then.
We will keep you updated...
Thank you
#2
Tech Rookie
Are any of these items in shops in Australia yet? As I am particularly interested in the new Tekin G11.
#3
Tekin G11
There will be 3 versions of the G11:
1. Sport
2. Pro
3. Pro TR
They are not due for release until the end of June or early July. Pre Orders are now open so you can contact your LHS to pre order.
Other items due to arrive around Mid to End July are:
1. Equaliser / Discharge Tray
2. Tekin Tools
3. Mini Rage Brushless System (3 versions)
1. Sport
2. Pro
3. Pro TR
They are not due for release until the end of June or early July. Pre Orders are now open so you can contact your LHS to pre order.
Other items due to arrive around Mid to End July are:
1. Equaliser / Discharge Tray
2. Tekin Tools
3. Mini Rage Brushless System (3 versions)
#5
Sponsorship
Looking for a sponsor?
Arcadia RC is on the hunt for drivers in NSW, QLD and VIC. Positions in other states have been filled up. All terms and conditions of sponsorship will only be discussed with approved applicants.
If interested, please forward a full race resume to:
[email protected]
Arcadia RC is on the hunt for drivers in NSW, QLD and VIC. Positions in other states have been filled up. All terms and conditions of sponsorship will only be discussed with approved applicants.
If interested, please forward a full race resume to:
[email protected]
#6
Tech Champion
iTrader: (9)
Good to see Arcadia making themselves available to the general public, i have been running their Tekin Speed controls for about the last 6 months, it has served me well so far, the speed control is very smooth, and seems to generate a ton of power. I have been reading a little about the forthcoming G11 speed control and am very impressed so far.
People whinge about the dimensions of the Tekin speed controls in comparison to other brands, but they fail to recognise that the Tekin products do not require an external barrell capacitor, a shotky diode (or in some cases a tree of them) or the famous Teabag as required on another range of speedies. Also the layout of the wiring makes for a very neat install, and prominent solder posts allow easy rewiring, for more details go look at the specs on the website www.teamtekin.com
If there is anything i can assist with please post away.
People whinge about the dimensions of the Tekin speed controls in comparison to other brands, but they fail to recognise that the Tekin products do not require an external barrell capacitor, a shotky diode (or in some cases a tree of them) or the famous Teabag as required on another range of speedies. Also the layout of the wiring makes for a very neat install, and prominent solder posts allow easy rewiring, for more details go look at the specs on the website www.teamtekin.com
If there is anything i can assist with please post away.
#7
Tech Elite
iTrader: (9)
Originally Posted by ArcadiaRC
Looking for a sponsor?
Arcadia RC is on the hunt for drivers in NSW, QLD and VIC. Positions in other states have been filled up. All terms and conditions of sponsorship will only be discussed with approved applicants.
If interested, please forward a full race resume to:
[email protected]
Arcadia RC is on the hunt for drivers in NSW, QLD and VIC. Positions in other states have been filled up. All terms and conditions of sponsorship will only be discussed with approved applicants.
If interested, please forward a full race resume to:
[email protected]
#8
Driver Sponsorship - SA
Hi Vortex
Thanks for pointing it out as SA is still open! Our mistake
Product Announcements
Sample of the PRS spur gear adaptor for the Losi JRX-S will be arriving in 2 weeks with the whole selection of PRS Pro Lite Spur Gears & Pinions.
Thanks for pointing it out as SA is still open! Our mistake
Product Announcements
Sample of the PRS spur gear adaptor for the Losi JRX-S will be arriving in 2 weeks with the whole selection of PRS Pro Lite Spur Gears & Pinions.
#9
Spintec Battery Manager
Arcadia RC is proud to present the most advanced discharger ever designed!
Spintec Battery Manager
Get more performance out of your racing packs!
- Coolflex 35 Amps discharge current
- V-Sense cut off technology (0.85 V per cell)
- Data memory
Gives you all the data you will ever need:
Runtime, Voltage, Energy, Capacity and Internal Resistance
Due to arrive in Australia - Mid to Late July - Pre Orders now open!
Spintec Battery Manager
Get more performance out of your racing packs!
- Coolflex 35 Amps discharge current
- V-Sense cut off technology (0.85 V per cell)
- Data memory
Gives you all the data you will ever need:
Runtime, Voltage, Energy, Capacity and Internal Resistance
Due to arrive in Australia - Mid to Late July - Pre Orders now open!
#11
DAVO
Hi DAVO
Have replied to your PM.
Have replied to your PM.
#12
Tech Champion
iTrader: (9)
Have heard some impressive results from this spintec batter manager, or batman as the septics call it. Also Spintec is in the process of producing a battery charger where each cell is charged independantly of the others, something that has never been done before. Looking forward to seeing things progress from this company.
#13
Originally Posted by ArcadiaRC
Arcadia RC is proud to present the most advanced discharger ever designed!
Spintec Battery Manager
Get more performance out of your racing packs!
- Coolflex 35 Amps discharge current
- V-Sense cut off technology (0.85 V per cell)
- Data memory
Gives you all the data you will ever need:
Runtime, Voltage, Energy, Capacity and Internal Resistance
Due to arrive in Australia - Mid to Late July - Pre Orders now open!
Spintec Battery Manager
Get more performance out of your racing packs!
- Coolflex 35 Amps discharge current
- V-Sense cut off technology (0.85 V per cell)
- Data memory
Gives you all the data you will ever need:
Runtime, Voltage, Energy, Capacity and Internal Resistance
Due to arrive in Australia - Mid to Late July - Pre Orders now open!
What benefit would a mod runner get in using this product? Im lucky to get 200-300 mah left in my pack during a run.
#14
Tech Champion
iTrader: (9)
Dan - it is also used to cycle your packs, the variable discharge is supposed to break up the crystals formed on the plates of the cells internals. Ih ave read thaty when used on 3 month old packs, you can actually hear the cells crackling away when attached to the unit when the pack is fully charged.
#15
I can confirm this - oldish packs crackle away when they're on the unit. I had a play with one on the weekend and they do seem to revive old packs quite well. You can certainly feel the difference in the car.