FS: Emaxx, TRF501x, RC10L3, DT02, TRF415, DX3, Blade CP Pro
12-04-2007, 06:40 PM
#1
FS: RC10L3, DT02, Blade CP Pro, DF-03, Hyper 8
TRAXXAS E-Maxx
I got this E-Maxx in a trade. It is almost a RTR, except one of the negative motor wires was ripped up by the exposed gears (Gearbox cover is missing), so this wire will need to be resoldered together first before it sees action. It also seems like the left front bulkhead has a crack in it, but it doesn't seem to affect it at all. Otherwise, it has all the stock servos, ESC, motors and radio. Comes with two Duratraxx 6 cell 3800 NiMH packs, with only 10-12 charges on it. This vehicle will need a charger, and soldering the negative motor wire back together before it can be run.
PRICE: SOLD!
Tamiya TRF501x
This TRF501x was a spare parts vehicle, but I have ran it once. It is practically brand new, and the only thing I took out of it was the rear differential pulley and belt. I have a spare belt that will come with it, but the rear pulley will need to be replaced. The Proline Holeshots on it are brand new, so is the GP4300 saddle pack included with the buggy. This one needs the body/wing, electronics, the rear differential pulley to run. Instruction manual was not in the picture, but will be included.
PRICE: NO LONGER FOR SALE.
Team Associated RC10L3
Got this one in a trade. I'm not too knowledgable on oval cars, but it has an Airtronics 94102Z servo and a 23T Stock Motor on it. What you see is what you get.
PRICE: $60 Shipped OBO.
Tamiya DT-02 Sand Viper
This Sand Viper has the optional Tamiya Ball Differential, but needs electronics, shocks and a new front shock tower to run.
PRICE: SOLD!
Tamiya TRF415
Another chassis I got in a trade, and it is not complete. The chassis comes with a lot of spare parts, but it is still missing front universal CVDs, turnbuckles, servo mounts, shocks, and wheel hexes. I believe this is the original 415, not the MSX, MSXX , SEX MRE or whatever the current one is. Chassis is adapted for a battery brace, and although not in the picture, I've got the graphite battery strap to it. The chassis is a bit dusty, but is virtually scratch-free although the bearings in the steering assembly might be shot, or just needs some grease.
PRICE: SOLD!
Spektrum DX-3 Radio Transmitter and Receiver
This radio functions fine, might need a little cleaning and batteries. Comes with one SR3000 Spektrum receiver.
PRICE: SOLD!
E-Flite Blade CP Pro
I've only flown this Blade a few times, and it has never been crashed. This helicopter is in great condition, with a few cuffs on the rotor blades, but it does not affect its flying characteristic. Comes with everything shown.
PRICE: SOLD!
Payment Policy: I only accept PayPal, sorry no checks, cash, CODs, wired transfer out of Nigeria, your sister's hand-in-marriage or money order. I'm not accepting any trades at this time.
Shipping Policy: All items will be shipped through USPS Priority Mail by default, unless you want to pay extra for UPS 3 day. I will only ship within the U.S. only, sorry.
Side Notes: All the items may be a bit dusty, and I do apologize in advance. West Texas is an extremely dusty, windy environment and even if you're indoors all day, dust will somehow get it. I do not have access to an air compressor, so I'm kind of stuck at selling these things with a little dust on them.
PLEASE Contact me through Private Messaging if you're interested, it's much easier to keep up with who wants what and who was in line first for something. Thanks!
I got this E-Maxx in a trade. It is almost a RTR, except one of the negative motor wires was ripped up by the exposed gears (Gearbox cover is missing), so this wire will need to be resoldered together first before it sees action. It also seems like the left front bulkhead has a crack in it, but it doesn't seem to affect it at all. Otherwise, it has all the stock servos, ESC, motors and radio. Comes with two Duratraxx 6 cell 3800 NiMH packs, with only 10-12 charges on it. This vehicle will need a charger, and soldering the negative motor wire back together before it can be run.
PRICE: SOLD!
Tamiya TRF501x
This TRF501x was a spare parts vehicle, but I have ran it once. It is practically brand new, and the only thing I took out of it was the rear differential pulley and belt. I have a spare belt that will come with it, but the rear pulley will need to be replaced. The Proline Holeshots on it are brand new, so is the GP4300 saddle pack included with the buggy. This one needs the body/wing, electronics, the rear differential pulley to run. Instruction manual was not in the picture, but will be included.
PRICE: NO LONGER FOR SALE.
Team Associated RC10L3
Got this one in a trade. I'm not too knowledgable on oval cars, but it has an Airtronics 94102Z servo and a 23T Stock Motor on it. What you see is what you get.
PRICE: $60 Shipped OBO.
Tamiya DT-02 Sand Viper
This Sand Viper has the optional Tamiya Ball Differential, but needs electronics, shocks and a new front shock tower to run.
PRICE: SOLD!
Tamiya TRF415
Another chassis I got in a trade, and it is not complete. The chassis comes with a lot of spare parts, but it is still missing front universal CVDs, turnbuckles, servo mounts, shocks, and wheel hexes. I believe this is the original 415, not the MSX, MSXX , SEX MRE or whatever the current one is. Chassis is adapted for a battery brace, and although not in the picture, I've got the graphite battery strap to it. The chassis is a bit dusty, but is virtually scratch-free although the bearings in the steering assembly might be shot, or just needs some grease.
PRICE: SOLD!
Spektrum DX-3 Radio Transmitter and Receiver
This radio functions fine, might need a little cleaning and batteries. Comes with one SR3000 Spektrum receiver.
PRICE: SOLD!
E-Flite Blade CP Pro
I've only flown this Blade a few times, and it has never been crashed. This helicopter is in great condition, with a few cuffs on the rotor blades, but it does not affect its flying characteristic. Comes with everything shown.
PRICE: SOLD!
Payment Policy: I only accept PayPal, sorry no checks, cash, CODs, wired transfer out of Nigeria, your sister's hand-in-marriage or money order. I'm not accepting any trades at this time.
Shipping Policy: All items will be shipped through USPS Priority Mail by default, unless you want to pay extra for UPS 3 day. I will only ship within the U.S. only, sorry.
Side Notes: All the items may be a bit dusty, and I do apologize in advance. West Texas is an extremely dusty, windy environment and even if you're indoors all day, dust will somehow get it. I do not have access to an air compressor, so I'm kind of stuck at selling these things with a little dust on them.
PLEASE Contact me through Private Messaging if you're interested, it's much easier to keep up with who wants what and who was in line first for something. Thanks!
Last edited by Thai3g_Eclipse; 01-20-2008 at 02:41 PM.
12-06-2007, 01:33 AM
#5
40shipped for the sand viper?
