F/S XRAY NT1 - Built but Never Run
#1
F/S XRAY NT1 - Built but Never Run
Just found out I'm gonna be a Dad next Spring so need to unload this car since I won't be able to race it next summer.
The car is built, brand new and never run. Graphite pieces have been sanded and glued. Threadlock used per instructions. The roller has the Xray 4mm chassis, Xray Multidiff, blue front springs and more parts listed below and the extra parts that come in the kit. Asking for $550 shipped in the lower 48 and will send USPS. Make me a reasonable offer and I can work with you on the price.
Transponder and throttle servo in pictures not included.
The car has the Barry Baker setup on it for 301 Raceway in Maryland.
Kit and Parts List
1 x 330000 - XRAY NT1 Nitro Touring Car - $399.99
1 x 335100 - NT1 Optional Xray Multi Diff - One Way - Solid - Set (installed on car) - $49.95
1 x 331101 - NT1 Optional Chassis 4mm - CNC Machined - Swiss 7075 T6 (4mm chassis installed on car - 3mm chassis included as spare) - $97.95
1 x 338517 - NT1 XCA Alu 7075 T6 Hard Coated Pinion Gear - 17T (1st) - $11.95
1 x 338183 - XRAY Spring-Set D=1.7 (28.5 LB) Dark-Blue - Soft-Medium (installed on car) - $7.95
1 x 335560 - NT1 Composite 2-Speed Gear 60T (1st) - $5.95
1 x 335555 - NT1 Composite 2-Speed Gear 55T (2nd) - $5.95
1 x 333424 - NT1 Anti-Roll Bar Rear 2.4mm - $6.95
1 x 338575 - NT1 Optional Clutch Shoe Ring - Yellow - $14.95
1 x 338523 - NT1 XCA Alu 7075 T6 Hard Coated Pinion Gear - 23T (2nd) - $11.95
1 x 335205 - NT1 Complete CVD Drive Shaft (1) - Front - Hudy Spring - $32.95
1 x Futaba 9451 Steering Servo (installed on car) - $74.99
My total was $721.48 (not including shipping costs).
At $550 this is a steal.
The car is built, brand new and never run. Graphite pieces have been sanded and glued. Threadlock used per instructions. The roller has the Xray 4mm chassis, Xray Multidiff, blue front springs and more parts listed below and the extra parts that come in the kit. Asking for $550 shipped in the lower 48 and will send USPS. Make me a reasonable offer and I can work with you on the price.
Transponder and throttle servo in pictures not included.
The car has the Barry Baker setup on it for 301 Raceway in Maryland.
Kit and Parts List
1 x 330000 - XRAY NT1 Nitro Touring Car - $399.99
1 x 335100 - NT1 Optional Xray Multi Diff - One Way - Solid - Set (installed on car) - $49.95
1 x 331101 - NT1 Optional Chassis 4mm - CNC Machined - Swiss 7075 T6 (4mm chassis installed on car - 3mm chassis included as spare) - $97.95
1 x 338517 - NT1 XCA Alu 7075 T6 Hard Coated Pinion Gear - 17T (1st) - $11.95
1 x 338183 - XRAY Spring-Set D=1.7 (28.5 LB) Dark-Blue - Soft-Medium (installed on car) - $7.95
1 x 335560 - NT1 Composite 2-Speed Gear 60T (1st) - $5.95
1 x 335555 - NT1 Composite 2-Speed Gear 55T (2nd) - $5.95
1 x 333424 - NT1 Anti-Roll Bar Rear 2.4mm - $6.95
1 x 338575 - NT1 Optional Clutch Shoe Ring - Yellow - $14.95
1 x 338523 - NT1 XCA Alu 7075 T6 Hard Coated Pinion Gear - 23T (2nd) - $11.95
1 x 335205 - NT1 Complete CVD Drive Shaft (1) - Front - Hudy Spring - $32.95
1 x Futaba 9451 Steering Servo (installed on car) - $74.99
My total was $721.48 (not including shipping costs).
At $550 this is a steal.
Last edited by Apex; 09-29-2007 at 04:38 AM.
#15
Tech Master
bump for a great seller