Tamiya 415/MS/Refine Parts - NEW IN BAG
#1
Tamiya 415/MS/Refine Parts - NEW IN BAG
Hello,
I have for sale a bunch of brand new in the package parts that are for the Tamiya 415. Because of the nature of the recent Tamiya cars, many of these parts will also fit the MS and the New Refine 2. Please email me with any questions.
I will accept paypal. Please PM with with questions regarding other payment methods. All paypal fee's are included in the price.
All parts will be shipped the day after payment is received. They will be shipped by USPS First Class Mail. Shipping fee's will be $2.00 for the first item and $.75 for every item after that (unless other wise noted next to the part due to the large nature of the item).
A little note on the Jergen front Aluminum diff for sale:
This aluminum front diff is custom made for the 415, 415 MS and the MSX Refine 2. If you run a diff, you will need this part. It uses all stock Tamiya 415 parts (pulley, diff rings, thrust bearings, outdrive bearings, etc.) so you do not have to source old Yokomo parts and the fit is absolutly perfect. You will also have a much smoother diff with this compared to the Yokomo and the diff will last forever. This unit is 100% brand new, never used and comes with 2 sets of Delrin Dogbone blades for absolutly zero wear on the outdrives. It also uses cone washers insted of the typical Tamiya diff spring and it comes with enough cone washers for three rebuilds. The custom diff screw is machined out of steel and allows the diff to be adjusted while still in the car...you don't have to take the front end apart to adjust the diff anymore. The picture includes all the items you receive with the diff.
Once again, everything on this list is absolutly, 100% brand new in its original factory packaging.
1 Jergen 415/MSX/Refine Front Aluminum Diff - SOLD!!
1 4005103 3mm Upper Deck $65.00 (additional $3.00 shipping)
2 4005104 Upper Deck $16.00 each (additional $2.00 shipping)
1 51191 MS rear shock tower $10.00
1 51190 MS front shock tower $9.00
1 53707 White low friction rear belt SOLD
1 53706 white low friction front belt SOLD
3 51068 suspension block D $8.50 each
1 51069 Suspension block X $8.50
1 51065 Suspension Block A $8.50
1 51066 Suspension block B $8.50
2 51067 Suspension Block B $8.50 each
2 53685 Front BRIDGE Suspension Mount $8.50 each
1 49342 Motor Mount Bulkhead (Heat Sink Type) $30.00 (additional $1.00 shipping)
1 53804 Reinforced rear outdrives - Delrin (white) $21.00
1 51058 Rear outdrives (stock, black) SOLD
1 53502 42mm lightweight Blue Dogbones $13.00
1 49343 Belt Stabilizer $12.00
1 53569 6mm Clamp Style Wheel Hub $13.00
1 53708 Direct Center Pulley SOLD
1 9805938 Steering Bellcranks with bearings $25.00
1 53640 5mm Ball Nut $5.00
1 50985 C Hun Carrier 4 degree $4.00
1 53427 Hard A Arms $15.00
1 50984 A Parts Bumper $4.00
1 53709 FL Coated suspension ball $7.00
If you are worried about doing business with me please PM and I can forward you references form those that have bought from me in the past. Also check out my ebay feedback. My ebay user name is: jackbutler1.
Please contact me with any questions!
Thanks
Joe
I have for sale a bunch of brand new in the package parts that are for the Tamiya 415. Because of the nature of the recent Tamiya cars, many of these parts will also fit the MS and the New Refine 2. Please email me with any questions.
I will accept paypal. Please PM with with questions regarding other payment methods. All paypal fee's are included in the price.
All parts will be shipped the day after payment is received. They will be shipped by USPS First Class Mail. Shipping fee's will be $2.00 for the first item and $.75 for every item after that (unless other wise noted next to the part due to the large nature of the item).
A little note on the Jergen front Aluminum diff for sale:
This aluminum front diff is custom made for the 415, 415 MS and the MSX Refine 2. If you run a diff, you will need this part. It uses all stock Tamiya 415 parts (pulley, diff rings, thrust bearings, outdrive bearings, etc.) so you do not have to source old Yokomo parts and the fit is absolutly perfect. You will also have a much smoother diff with this compared to the Yokomo and the diff will last forever. This unit is 100% brand new, never used and comes with 2 sets of Delrin Dogbone blades for absolutly zero wear on the outdrives. It also uses cone washers insted of the typical Tamiya diff spring and it comes with enough cone washers for three rebuilds. The custom diff screw is machined out of steel and allows the diff to be adjusted while still in the car...you don't have to take the front end apart to adjust the diff anymore. The picture includes all the items you receive with the diff.
Once again, everything on this list is absolutly, 100% brand new in its original factory packaging.
1 Jergen 415/MSX/Refine Front Aluminum Diff - SOLD!!
1 4005103 3mm Upper Deck $65.00 (additional $3.00 shipping)
2 4005104 Upper Deck $16.00 each (additional $2.00 shipping)
1 51191 MS rear shock tower $10.00
1 51190 MS front shock tower $9.00
1 53707 White low friction rear belt SOLD
1 53706 white low friction front belt SOLD
3 51068 suspension block D $8.50 each
1 51069 Suspension block X $8.50
1 51065 Suspension Block A $8.50
1 51066 Suspension block B $8.50
2 51067 Suspension Block B $8.50 each
2 53685 Front BRIDGE Suspension Mount $8.50 each
1 49342 Motor Mount Bulkhead (Heat Sink Type) $30.00 (additional $1.00 shipping)
1 53804 Reinforced rear outdrives - Delrin (white) $21.00
1 51058 Rear outdrives (stock, black) SOLD
1 53502 42mm lightweight Blue Dogbones $13.00
1 49343 Belt Stabilizer $12.00
1 53569 6mm Clamp Style Wheel Hub $13.00
1 53708 Direct Center Pulley SOLD
1 9805938 Steering Bellcranks with bearings $25.00
1 53640 5mm Ball Nut $5.00
1 50985 C Hun Carrier 4 degree $4.00
1 53427 Hard A Arms $15.00
1 50984 A Parts Bumper $4.00
1 53709 FL Coated suspension ball $7.00
If you are worried about doing business with me please PM and I can forward you references form those that have bought from me in the past. Also check out my ebay feedback. My ebay user name is: jackbutler1.
Please contact me with any questions!
Thanks
Joe
Last edited by koabich; 01-18-2006 at 05:13 AM.
#3
Jeff,
Got it and sent one back!
Thanks
Got it and sent one back!
Thanks
#5
Originally Posted by Guo Chean
Hi Sir
i very interested of this product may i know how much will you selling this plus shipping? thanks
1 Jergen 415/MSX/Refine Front Aluminum Diff $60.00
can i ask Jergen product is from Japan or US?
i very interested of this product may i know how much will you selling this plus shipping? thanks
1 Jergen 415/MSX/Refine Front Aluminum Diff $60.00
can i ask Jergen product is from Japan or US?
But if you are in the US, shipping is $2.00. Anywhere outside the US, shipping will be an additional $10.00.
The diff is manufactured by a machinist in Germany out if billet stock!. Jergen happens to be his name!
Thanks
Joe
Last edited by koabich; 01-17-2006 at 07:38 PM.
#6
The front diff is sold!
#8
Jeff,
I received payment! Thanks!
I received payment! Thanks!
#9
LOWERED SOME PRICES!!!
#10
Updated!!
Make offers!
Make offers!
#11
ttt